Diesel 500 Compact



FuelDiesel or #2 heating oil
Furnace  Indirect fired with stainless steel heat exchanger
Heat output500,000 BTU/hr
Furance burnerBeckett CF800
Heated air temperatureUp to 210°F
Temperature controls1.  Furnace output temperature – cycling mode
2.  Constant heat output – blower modulation mode
3. Remote thermostat placed within structure
Drying Area Capability800 to over 5,000 sq. ft. (10 ft. ceilings)
Fuel Supply190 gallon tank
Furnance fuel consumption at full output82 gallons per 24 hours
Furnace run time at full output55 hours
Normal run time2 to 3 1/2 days in cycling mode
Heat recoveryDuctable return air for make-up air mode
System Electrical Requirments15 amps 208/230v single phase
Supply Blower Volume2, 000 to 4,200 cfm  (VFD provides speed control)
Autonomous Exhaust Blower16″ variable speed axial fan
Air duct150′ of 16″ flexible heavy duty hi-temp hose
GeneratorKubota GL7000 Diesel  (54.2 amps @ 120v)
Generator power available for accessories13 to 25 amps @ 120 volts (also has 220v outlet)
Generator fuel consumptionapproximately .6 to 1 gal/hr. depending upon output
TrailerMiddlebury 6 x 12′ single axle cargo trailer with 5,200 lb. axle
Wheels6 bolt alloy wheels with 225/75R tires
Trailer weight1900 lbs.
Approximate weight with full fuel tank4000 lbs
Trailer lnterior lightingtwo overhead lights
Trailer exterior lightingside door area light, rear doors flood light
Trailer electrical power supply12 v battery and an onboard auxillary battery charger
Exterior duct connectors & coversHeavy duty 16 ga. stainless steel
Sunday I delivered a new Diesel 500 to Alan Lystila owner of Extreme Supplies in Clinton, Michigan. This is his second machine. He already has a Diesel 330 with over 3,500 hours of use. Alan often rents his trailers out to restoration contractors.
Alan LystilaOwnerExtreme SuppliesClinton, MI


Grand Rapids

Cedar Springs

United States