Diesel 350

DrySmart Diesel 350 Heat Drying Trailer

Specs

Fuel Diesel or #2 heating oil
Furnace  Indirect fired with stainless steel heat exchanger
Heat output  Up to 368,000 BTU/hr
Furance burner Beckett CF500
Heated air temperature up to 200°F
Temperature controls 1.  Furnace output temperature – cycling mode
2.  Constant heat output – blower modulation mode
3. Remote thermostat placed within structure
Drying Area Capability 700 to over 3,000 sq. ft. (10 ft. ceilings)
Fuel Supply 155 gallon tank
Furnance fuel consumption at full output 60 gallons per 24 hours
Furnace run time at full output 72 hours
Normal run time 2 1/2 to 3 1/2 days in cycling mode
Heat recovery Ductable return air for make-up air mode
System Electrical Requirments 15 amps 110v single phase
Supply Blower Volume 1,400 to 2,800 cfm  (VFD provides speed control)
Autonomous Exhaust System 16″ variable speed axial fan
Exhaust electrical requirements 15 amp 115v circuit
Air duct 150′ of 16″ flexible heavy duty hi-temp hose
Trailer Middlebury 6×12 single axle cargo trailer with 5,200 lb. axle
Trailer weight/carrying capacity 1300 lbs. empty/3900 lbs load capacity.  Max GVW 5,200 lbs.
Approximate trailer weight with full fuel tank 2900 lbs.
Wheels Heavy duty 6 Bolt Alloy wheels
Trailer lnterior lighting Two overhead lights
Trailer exterior lighting Side door area light, rear doors flood light
Lighting power supply 12 v battery and an onboard auxillary battery charger
Exterior duct connectors & covers Heavy duty 16 ga. stainless steel
Sunday I delivered a new Diesel 500 to Alan Lystila owner of Extreme Supplies in Clinton, Michigan. This is his second machine. He already has a Diesel 330 with over 3,500 hours of use. Alan often rents his trailers out to restoration contractors.
Alan LystilaOwnerExtreme SuppliesClinton, MI

Rockford

Grand Rapids

Cedar Springs

United States